Introduction
This guide provides a step-by-step process for integrating Jetson Platform Service (JPS) with Allxon Platform. It assumes you already have a Jetson device and are ready to begin the configuration.
System Requirements
-
JetPack 6.0 or later – Ensure your Jetson device is running a compatible version of JetPack, as this is required for JPS services.
Install JPS
Follow the official NVIDIA documentation to install the Jetson Platform Service on your device:
👉 Installation Instructions
Start the Monitoring Service
The Monitoring Service collects system metrics and health data from your Jetson device.
👉 Monitoring Service Guide
Start the VST Service
The VST Service handles efficient management of cameras and video streams on Jetson-based platforms.
👉 VST Service Guide
Start the Ingress Service
The Ingress Service provides a gateway for external communication, which is required for Allxon integration.
👉 Ingress Service Guide
Confirm and Configure the Ingress Service Port
-
Default Port: The Ingress Service listens on port 30080 by default.
-
Allxon Portal Configuration: In the Group Settings page of the Allxon Portal, configure the same listen port to allow Allxon to communicate with your Jetson device.
Connect JPS through Allxon
Once JPS services are running and the Ingress port is configured, you can connect JPS to the Allxon Portal via the Connect X feature.